top of page

LPKF ProtoMat S64

El más polifacético para la creación rápida de prototipos PCB


LPKF ProtoMat S64 – The Standard for PCB Prototyping

  • Fully automatic operation incl. automatic tool change

  • Low-maintenance high-speed milling spindle

  • Intuitive, integrated system software

  • Camera controlled fiducial recognition and milling depth/width control

  • Granite base for highest accuracy results

The system that sets the standard for almost all in-house PCB prototyping applications: The ProtoMat S64 convinces with speed and reliability. The high-speed of the low-maintenance milling motor guarantees the production of fine structures as small as 100 μm and allows the production of multilayer boards when used in conjunction with a lamination press. Additional standard features, including dispenser and vacuum table, make the ProtoMat S64 the perfect addition to any development environment.

Milling Spindle 60,000 RPM

The milling spindle with 60,000 RPM guarantees the shortest machining times and highest geometric accuracy. It is low-maintenance due to the new pneumatic self-cleaning function for the motor and milling depth sensor. The granite machine base also ensures consistently accurate results.


Automatic: Tool Change, Milling Width Adjustment, Dispensing

Up to 15 tools – more if required – can be changed automatically during the production process. Depend¬ing on the depth, the conical milling cutters generate different insulation channels. The automatic milling width adjustment ensures that the milling contour has a constant width. This shortens the set¬up time and enables operator-free performance.

Sensors in the ProtoMat S64 ensure optimally controlled, exact milling depth and also monitor the tool change process.

Housing parts can be machined in up to 2.5 dimensions. If required, the integrated dispenser can automatically apply solder paste to solder pads. Additional data calculation is not necessary.

Integrated, Intuitive Operating Software

The ProtoMat system software is highly flexible and easy to use. A parameter library for different materials supports the easy machine operation. If required, the integrated process guide leads the user step by step through the machining process.

Galería de Fotos

ProtoMat S64


ProtoMat S64


ProtoMat S64

Datos Técnicos

LPKF ProtoMat S64

Max. Material size and layout area (X/Y/Z)

Mechanical resolution (X/Y)


Milling spindle

Milling spindle

Tool change

Milling width adjustment

Tool holder

Drilling speed

Travel speed (X/Y)

X/Y-drive, Z-drive, tool feed

Solder paste dispense rate

Dimensions (W x H x D), weight

Operating Conditions

Power Supply

Compressed Air Supply

229 mm x 305 mm x 8 mm

9” x 12” x 1.4”/ 0.9”*)

0,5 μm (0,02 Mil)

± 0,001 mm (± 0,04 Mil)

Max. 60 000 RPM, software-controlled

Automatic, 15 positions

Automatic, micro switch ± 1 μm (0.04 mil)

Max. 60 000 RPM, software-controlled

3,175 mm (1/8”)

100 strokes/min

Máx. 150 mm/ s (6”/ s)

3-phase stepper motor, 2-phase stepper motor, 2-phase stepper motor

≥ 0.3 mm (≥ 0.011”) (solder point), ≥ 0.4 mm (≥ 0.015”) (pad)

680 mm x 560 mm x 800 mm (26.8” x 22.0” x 31.5”), 95 kg (210 lbs)

6 bar; 200 Liter @ atmosperic pressure (90 PSI @ 1.25 CFM)

90 - 240 V, 50 - 60 Hz, 450 W

Brochure LPKF ProtoMat S Series
Download PDF

Cirentec S.A. de C.V

Hidalgo No 6,
Colonia Santa Maria Tonantzintla
San Andres Cholula, Puebla, 72840



bottom of page