top of page
lpkf-protomat-s104.jpg

LPKF ProtoMat S104

El especialista para aplicaciones de microondas y HF

Descripción

LPKF ProtoMat S104 – Specialist for HF and Microwave Applications

  • Top-class model with fully automatic operation

  • Available rotation speed up to 100,000 RPM

  • 20 tool change positions

  • Optical fiducial recognition

  • Integrated vacuum table

  • Easy-to-use package

  • Granite base for highest accuracy

The LPKF ProtoMat S104 for PCB prototyping is fully equipped for the electronics laboratory. Thanks to the high-performance spindle and vacuum table, it is also suitable for HF applications and thin laminates as well as substrates with sensitive surfaces (conductor path widths as small as 100 μm on FR4 18/18 Cu). The system software considers the special requirements of HF materials.

Fast and Precise

The ProtoMat S104 is particularly fast and precise due to the 100,000 RPM spindle motor which allows for higher travel speeds with a mechanical resolution of just 0.5 μm. In combination with the machine’s stable granite base, this ensures optimum accuracy for drilling and milling of even very fine structures. The high-speed milling motor and the milling depth sensor are self-cleaning and therefore low-maintenance.

 

Fully Automatic

Automated operation makes things easy for users of the ProtoMat S104. Sensor-controlled, the material and copper thickness are measured automatically and enable the exact calculation of the required milling depth. The machine, which is well equipped with 20 tool positions, automatically changes the corresponding tools during the production process. The automatic milling width adjustment also ensures that any conical tools being used will always have a constant and correct width.

If required, the integrated dispenser can automatically apply solder paste to solder pads without any additional data preparation. The short set-up time and the operator-free machining enable the user to achieve short process times.

2,5 Dimensional

With its Z-axis drive, the ProtoMat S104 is ideal for machining front panels and enclosures – or for pocket milling in printed circuit boards. It is also easy to machine assembled PCBs and to produce plastic or aluminum enclosures and faceplates.

Intuitive: The Software

The system software in the ProtoMat S104 is highly flexible and easy to operate. The software is designed in order to meet the particularly high requirements of RF applications. A parameter library for different materials supports user-friendly operation.

Galería de Fotos
ProtoMat_S104_front.jpg

ProtoMat S104

ProtoMat_S104_schraeg.jpg

ProtoMat S104

Datos Técnicos

LPKF ProtoMat S104

Max. Material size and layout area (X/Y/Z)

Mechanical resolution (X/Y)

Repeatability

Milling spindle

Milling spindle

Tool change

Milling width adjustment

Tool holder

Drilling speed

Travel speed (X/Y)

X/Y-drive, Z-drive, tool feed

Solder paste dispense rate

Dimensions (W x H x D), weight

Operating Conditions

Power Supply

Compressed Air Supply

229 mm x 305 mm x 8 mm (9” x 12” x 0.3”)

0,5 μm (0,02 Mil)

± 0,001 mm (± 0,04 Mil)

Max. 100 000 RPM, software-controlled

Automatic, 20 positions

Automatic, micro switch ± 1 μm (0.04 mil)

Max. 100 000 RPM, software-controlled

3,175 mm (1/8”)

100 strokes/min

Máx. 150 mm/ s (6”/ s)

3-phase stepper motor, 2-phase stepper motor, 2-phase stepper motor

≥ 0.3 mm (≥ 0.011”) (solder point), ≥ 0.4 mm (≥ 0.015”) (pad)

680 mm x 560 mm x 800 mm (26.8” x 22.0” x 31.5”), 95 kg (210 lbs)

6 bar; 200 Liter @ atmosperic pressure (90 PSI @ 1.25 CFM)

90 - 240 V, 50 - 60 Hz, 450 W

Brochure LPKF ProtoMat S Series
Download PDF

Cirentec S.A. de C.V

Hidalgo No 6,
Colonia Santa Maria Tonantzintla
San Andres Cholula, Puebla, 72840

Telefono:
(222)2613009

Correo:
ventas@cirentec.com.mx
alfredomtz@cirentec.com.mx

bottom of page